Специальная машина для литья ПВХ под давлением
AX/UPVC278 (278T)
количество:
| DESCROPTION | UNIT | MODEL: AX/UPVC-278 | |
| A | B | ||
| INJECTION UNIT | |||
| Screw Diameter | mm | 55 | 60 |
| Screw L:D ratio | L/D | 23 | 21 |
| Shot Size (TheoreticalAX) | cm3 | 651 | 775 |
| Injection Weight (PS) | g | 592 | 705 |
| Injection Rate | g/s | 220 | 265 |
| Injection Pressure | MPa | 196 | 164 |
| Max. Screw Speed | rpm | 0-168 | |
| CLAMPING UNIT | |||
| Clamp Tonnage | kn | 2780 | |
| Tonnage Stroke | mm | 550 | |
| Space Between Tie Bars (W*H) | mm | 580X580 | |
| Max. Mold Height | mm | 600 | |
| Min. Mold Height | mm | 220 | |
| Ejector Stroke | mm | 140 | |
| Ejector Tonnage | kn | 70 | |
| OTHERS | |||
| Max. pump Pressure | MPa | 16 | |
| Pump Motor Power | kw | 31 | |
| Heater Power | kw | 15 | |
| Machine Dimension (LxWxH) | m*m*m | 6.2X1.64X2.2 | |
| Machine Weight | Ton | 7.6 | |
| Oil Tank Capacity | L | 385 | |
