Machine de moulage par injection entièrement électrique EV120E
EV120E
commande minimum
1
Quantité:
All-Electric Injection Molding Machine, Full Electric Injection Moulding Machine, Servo Electric Injection Molding Machine, All-Electric Plastic Injection Moulder,
DESCROPTION | UNIT | MODEL: EV120E | ||
A | B | C | ||
INJECTION UNIT | ||||
Screw Diameter | mm | 36 | 40 | 45 |
| Screw L/D Ratio | L/D | 23.3 | 21 | 18.7 |
Shot Volume (Theoretical) | cm3 | 173 | 213 | 270 |
Shot Weight (PS) | g | 157 | 194 | 246 |
oz | 5.54 | 6.84 | 8.68 | |
Injection Rate | g/s | 177 | 219 | 277 |
Injection Pressure | Mpa | 247 | 200 | 158 |
Screw Speed | rpm | 0-400 | ||
CLAMPING UNIT | ||||
Clamp Force | Ton | 120 | ||
Toggle Stroke | mm | 360 | ||
Space Between Tie Bars (W*H) | mm | 470X470 | ||
Max. Mold Height | mm | 480 | ||
Min. Mold Height | mm | 160 | ||
Ejector Stroke | mm | 100 | ||
Ejector Force | Ton | 3.5 | ||
OTHERS | ||||
Total Electrical Capacity | kw | 70 | ||
Heater Power | kw | 9.5 | ||
Machine Dimension (LxWxH) | m*m*m | 5.5x1.5x2.2 | ||
Machine Weight | Ton | 5.6 | ||
All-Electric Plastic Injection Moulder, High Precision All-Electric Injection Molding Machine
